WA Production Vocal Splitter v2.1.0 / v1.0.0 RETAiL [WiN, MacOSX]

For decades, audio engineers have used a certain processing trick on vocals to help lacklustre mono vocals leap from stereo speakers. Now you can replicate that secret technique with one simple plugin. Vocal Splitter is a handy one-stop unit for turning mono vocals into thick, modern-sounding stereo. Of course, you can also this plugin on audio other than vocals... Create wide and modern vocals from a mono source Presets for one-click transformations * Speed & Depth set the power of effect Drive dial to add grit and increase definition * Mute Source button for using effect as a send Under The Hood Feel free to skip this part if you like, but here's what is going on under the hood: Vocal Splitter uses a combination of a phase-offset vibrato effect (that splits the left and right channel by asymmetrically detuning the channels) and an asymmetrical rectification of the left and right signal (creating a better defined stereo image). Combining these two effects in one plugin is an especially effective way to create a defined stereo split vocal signal with minimal phasing. Mix The central mix dial sets the dry / wet ratio of the original source signal and added stereo signal. If you want to listen to the added stereo signal in solo mode or use the plugin on an effects bus, just press the Mute Source button, muting the source signal so that you only hear Vocal Splitter's processed audio. Speed & Depth These dials work together to control the behaviour of the phase-offset vibrato effect that splits the left and right channels. The channels are asymmetrically detuned and these dials adjust that effect so that you can achieve any intensity of processing, from subtle thickening to full-on doubling. Drive The drive feature lets you control the intensity of the asymmetrical rectification of the left and right signal, creating a better defined stereo image. If that sounds technical, don't worry. All you need to know is that pushed hard it provides a saturation-like effect and brings the stereo image back in towards the centre. Filters The high pass and low pass filters allow you to filter the added stereo signal, especially important if you want the effect to only apply to a specific frequency range and avoid unwanted phasing in the low end. Bypass The Vocal Splitter logo acts as a bypass control for the whole plugin, and is smoothed to be click and pop free for unhindered A/B testing. W. A. Production are real-life producers making creative plugins to help you achieve studio quality processing quickly and easily. Enjoy! * Create wide and modern vocals from a mono source * Presets for one-click transformations * Speed & Depth set the power of effect * Drive dial to add grit and increase definition * Mute Source button for using effect as a send System Requirements: Windows 7 or higher (32 / 64 bit) Mac OSX 10.7 or higher (32 / 64 bit) AAX - ProTools 11 or higher Team RET Note: (v2.1.0) 2 new and old license system by WA has been keygend this time. One by RET and one by R2R. Enjoy! Old System : WebAuth. AES128 is used for first 16 bytes. The authorization file can be used in another computer because there are no machine id verification. New System : WebAuth. BASE64 and BlowFish are used. It has machine id, congrats! But there are no product code. One auth file can be used for other products (as far as machine id is same!).