Nasko N-TILT v1.0 [PLUGDATA-FX] [Synth Presets]

N-TILT is a flat spectrum tilt filter with unipolar modes, center frequency offset and a fast workflow. Every song has a tonal balance / frequency response that it leans towards. Bringing in new elements often means adjusting the frequency response of that new element to be closer to that of the song you're working on. Flat spectrum tilt filters try to be as unbiased as possible when tilting the spectrum by combining a set of cleverly combined shelf filters. This allows for very transparent rebalancing of a signals' frequency response. N-TILT lets you offset the center frequency of where the tilt happens and has unipolar tilt modes, in which a filter crossover is introduced to have the tilt filter only work on either the left or right side. TILT SPECTRUM GRAPH clicking and holding the tilt icon in the middle of the spectrum analyzer adjusts the tilt +/- dB per Octave amount by dragging up and down, while moving the mouse left and right adjusts the center frequency of that tilt. You can control the center frequency and tilt amount individually below the tilt spectrum graph. BIPOLAR AND UNIPOLAR N-TILT comes with a special Unipolar mode in which it introduces a band split at the center frequency to limit the tilt filter on either the left or right side. You can also set the output gain of N-TILT by hovering over the OUT text. SPECTRUM STYLES Clicking on the spectrum icon selects between 2 Spectrum Graph render styles that affect N-TILT globally. That's all! HAVE FUN NOTE: Make sure to disable the Plugdata-fx SAFETY LIMITER, as that will limit your output to below 0dB! BLUE = Safety Limiter ON.