M Media Audio The Mad Scientist v1.0.0 [WiN]

Parallel compression with a tube heart. The Mad Scientist is a parallel RMS compressor built around a simple idea: the more you drive the input, the more character you get. Even-order harmonic saturation is baked directly into the input stage - no separate drive knob, no menu option. Push the gain, the tubes light up, and a subtle warmth gets added before the signal hits the compressor. Back off, and it cleans up. Underneath the steampunk shell is a full-featured dynamics processor. Fixed 4:1 ratio keeps the compressor musical without requiring you to think about it. The Mix knob blends the compressed wet signal against the clean dry signal for natural-sounding parallel compression at any setting. M/S mode processes the mid and side channels independently so stereo width stays intact even under heavy compression. Auto-release adapts program-dependently - fast when the compressor is working hard, slow when it is barely touching. Parallel Compression All the density. None of the squash. The Mix knob blends the compressed wet signal against the uncompressed dry signal - classic NYC-style parallel compression, dialed in from a hint to full commitment. The fixed 4:1 ratio is tuned for bus use: musical, predictable, nothing to overthink. Most engineers find their sweet spot somewhere between 60 and 100%. * Mix - 0 to 100% parallel blend. 50% = full body, intact transients * Fixed 4:1 ratio - Bus-calibrated, musically transparent * RMS detection - Responds to program energy, not just peaks * Auto-release - Fully left = program-dependent, adapts continuously Input-Driven Saturation Push the gain. Hear the difference. Even-order harmonic saturation is built into the input stage - there is no separate drive knob because it does not need one. Push the Gain control and the tube overlays glow progressively while the saturation scales smoothly with the signal. Back off and it cleans up. Both the wet and dry signals carry the color from the input stage, so the harmonic character stays consistent at every Mix setting. * Gain - -12 to +12 dB input trim, drives saturation amount * Tanh saturation - Even-order harmonics only - warm, not harsh * Three-segment tube display - Tied to input gain, not output level * Pre-parallel split - Saturation applies to both wet and dry signals M/S Processing Compress without collapsing the image. Toggle M/S mode and the plugin encodes your stereo signal to mid and side channels, compresses them independently, then decodes back to stereo. The center stays controlled while the sides breathe - no width collapse, no mono-ification. Useful on full mixes, wide stereo buses, and anything where parallel compression in L/R mode starts narrowing the image. * M/S toggle - Switch between L/R and Mid/Side processing * Independent compression - Mid and side channels processed separately * Width preserved - Sides compress independently without affecting center * Our keygen may also work for macOS and Linux: Copy the generated license to your userdata: "MMediaAudio\PluginName.settings" Try it your self! Dont forget to block: read _mocha.txt M Media Audio The Mad Scientist v1.0.0 MOCHA