MAP Audio Rhino3 v1.3.3 [WiN]

Hybrid FM synthesizer Six oscillators per voice with FM, additive and wavetable sources, two multimode filters, drawn envelopes, an FM routing matrix, a step sequencer and four effect slots. Play it below, in your browser. The engine The sources mix inside one voice: an FM pair can sit next to a drawn spectrum, and both run through the same filters and envelopes. Six oscillators, a full FM matrix Each voice runs six oscillators. A source is one of the built-in waveforms or one of six wavetables you draw in the additive editor or derive from a WAV. Any oscillator can frequency-modulate any other, including itself, with exponential or linear scaling, and two ring modulators take any mix of the oscillators. Every oscillator has its own waveshaper. Two filters, 26 modes Lowpass, highpass, bandpass and notch at 12, 24 and 36 dB per octave, three analog lowpass and highpass models, and comb, allpass, diode, transistor-ladder, Sallen-Key and SEM types. Each oscillator sends to Filter 1, Filter 2 and a dry bus in any mix, each filter can feed back into the other, and a waveshaper sits inside each filter loop. Envelopes you draw Thirty-one of them: level, waveshape, pitch and phase per oscillator, cutoff, resonance and waveshape per filter, and a global pitch envelope. Up to 128 segments each, with curvature, a loop region and tempo sync. Keyboard tracking, velocity and aftertouch each have their own curve. Effects Four effect slots with 24 types: two delays, six choruses, three ensembles, a flanger, a quad phaser, four reverbs, a granulator, CrazyComb, autopan, rotary speaker, ring modulation, overdrive and a three-band EQ. MAP Audio Rhino3 v1.3.3 Team R2R